Skip to main content
Free Vend lets drivers charge at a station without signing in. They don’t need the mobile app, an RFID card or a payment card. When Free Vend is on, our system approves every request to start a charge on that station. Use Free Vend for complimentary charging, such as at a workplace, hotel or dealership where you don’t want to charge drivers or track who is charging.
Important: Free Vend only works on stations assigned a free rate. You can’t turn on Free Vend while the station has a paid rate, and you can’t assign a paid rate to a station while Free Vend is on. This stops a station from giving away charging you meant to charge for.

Free Vend Is Not Plug and Charge

Many station manufacturers use “Plug and Charge” as another name for Free Vend, because in both cases the driver only plugs in. On our platform, Plug and Charge means ISO 15118 Plug and Charge: the vehicle identifies itself to the station with a digital certificate, so only enrolled vehicles can charge. Free Vend lets anyone charge and doesn’t identify the driver. To set up Plug and Charge, contact support.

Before You Begin

  • You need access to the station in Network Manager
  • The station needs a free rate: one with its Maximum session cost set to 0. A rate whose prices are all 0 but whose Maximum session cost is left blank counts as paid, and Free Vend can’t be turned on with it. If your network doesn’t have a free rate, create one by going to Rates and clicking Create Rate
  • The station itself needs to be set to start charging as soon as a vehicle is plugged in. See Configure the Station Hardware below

Step 1: Assign a Free Rate

  1. In Network Manager, go to Stations and open the station
  2. In the Rate section, click Update
  3. Search for and select a free rate
  4. Click Update to save
For more detail, see Setting Rate on a Station.

Step 2: Turn On Free Vend

  1. On the same station page, go to the Authorization Method Settings section
  2. Click Update
  3. Select Free Vend
  4. Click Update, then click Update Anyway in the confirmation window
  5. A Station Updated message confirms the change
If the station still has a paid rate, the update is rejected and a message explains why. Go back to Step 1, assign a free rate, then try again.

Configure the Station Hardware

Turning on Free Vend in Network Manager changes how our system responds to the station. It does not change any settings on the station itself. Most stations still wait for a driver to tap a card or start the charge from an app before they ask our system for approval. For drivers to simply plug in and charge, set the station to start charging on its own when a vehicle is plugged in. Manufacturers call this setting different things, such as “Free Vend” or “Free Mode”. Some call it “Plug and Charge”, which is not the same as Plug and Charge on our platform. See Free Vend Is Not Plug and Charge. To find and change the setting:
  1. In Network Manager, open the station and click See all logs in the Recent device logs section
  2. Click Issue Station Command and choose Get Configuration. You can also press Cmd+P (Mac) or Ctrl+P (Windows) from any station page to open the same list of commands
  3. In the logs, look for a configuration key related to Free Vend in the station’s response. Only keys with a readonly value of false can be changed
  4. Click Issue Station Command again, choose Change Configuration, and set that key to turn the feature on. Keys and values are case sensitive, so match them exactly as they appear in the Get Configuration results
On OCPP 2.0.1 stations, use Get Variables and Set Variables instead of Get Configuration and Change Configuration. If you can’t find a matching key, refer to your station’s hardware manual or contact the manufacturer.

Verify Free Vend Is Working

  1. Make sure the station’s status is Available
  2. Plug in a vehicle without tapping a card or using the mobile app
  3. Confirm the charge starts
  4. In Network Manager, check that the session appears on the station’s sessions list
If the charge doesn’t start, open the station’s logs (click See all logs on the station page) while you plug in. If you don’t see any start request from the station, the station isn’t set to start charging on its own yet. See Configure the Station Hardware.

What to Expect

  • Sessions are still recorded. Every Free Vend charge appears in your session history with its energy and duration
  • Drivers aren’t identified. Because no one signs in, a Free Vend session isn’t linked to a driver account unless the driver also used an RFID card or the mobile app
  • Drivers aren’t charged. Free Vend sessions use the station’s free rate

Turning Off Free Vend

  1. In Network Manager, go to Stations and open the station
  2. In the Authorization Method Settings section, click Update
  3. Clear Free Vend
  4. Click Update, then Update Anyway
If you plan to start charging drivers at this station, turn off Free Vend before you assign a paid rate. Make sure at least one other authorization method is turned on, so drivers can still start a charge. If billing isn’t enabled for your network, a station with a paid rate can only use Payment Terminal. See Station Authorization Methods Overview.